How To Tie On A Chatterbait

Chatterbaits are enticing jigs that can be attached to the rod’s fishing hook and typically come in a wide array of designs that resemble weeds or worms. 

A pitching jig, blade, duo lock, and split rings are all components of a chatter bait. It’s important to properly tie chatter bait so that it not only remains on the line but also travels in the right direction to attract larger fish.

The blade of the chatter bait makes a clicking sound, which causes friction in the water.  The fish can sense the vibrations in the water, causing it to seek out the source of the vibration and ultimately take the bait. This vibrating feature of the chatter bait is crucial while fishing in muddy or even clear water.

Here are some helpful tips which will guide you in choosing and tying the correct chatter bait to your fishing line for a successful fishing trip.

How To Tie A Chatterbait To a Fishing Line

How To Tie A Chatterbait To a Fishing Line

Tie The Line

Begin by keeping the lure by the blade with care. Take into account the length you’ll need, which will vary depending on where you’ll be fishing. In some cases, one or two feet will suffice. While in others, four or five feet is required.

Adjust your pole’s line so that you have the ideal amount of free space. You’ll be able to start tying on the lure once you reach the end of the line. 

Double The Line

After that, you’ll want to double the line by pulling it back through the hole. It will help you get your knot started. By taking the free end of the loop, pushing it around the standing segment, and then passing the loop through this section, you can make an overhand knot with the end of the line you’ve now looped.


You’ll want to pull the line now, but make sure it’s loose enough that you can get your lure back through the loop. Depending on your chatter bait lure, this could take three or four inches. 

Finishing It

You can now note that the hole in your line is above the loop. If you like, you can slightly wet down the line. It will help prevent the line from being rigid or twisted after they are tied absolutely. Last, but not least, pull on both ends of the thread. 

How To Tie A Chatterbait For Bass

Here are the six simple steps to tie a chatter bait for bass.

Determine the color and size

We consider using a 3/8 ounce or 5/8 ounce chatter bait. These are the best sizes for catching largemouth bass and other large fish. Choose from brown, orange, black, or blue. These are eye-catching hues that never fail to enrage your prey. 

Get your Spinnerbait

It will make your work much easier even if you do not have professional skills.

Grab Your Fishing Line

It doesn’t matter whether it’s braided or monofilament; either one should suffice. 

Pass the Fishing Line Through

The next step is to thread your fishing line through the lure. The hexagonal blade of the lure should be kept in your hand. Then move the line through the eyelet on the lure. 

The target is to get the right length of rope through this tiny opening. Suspending the lure from under the fishing area should be relatively simple as a result. 

When going to open water, a decent length of fishing line to use is 4 to 5 feet. Otherwise, you should be able to get away with 1 to 2 feet.

Make a Loop

A loop secures the chatter bait. It’s crucial to learn how to tie an overhand knot because it’s safer and more effective. 

Pull your line all the way down through the hole, leaving some room in your circle. Return the lure through the loop you’ve just made and tie a smooth, tight knot.

Knot It

Finally, double-check that the knot is stable. To keep your fishing line from being rigid or tangled, you may dampen it with water. 

Bring the two ends of the fishing line together and tie them together with a knot. Simply cut the extra length with your pliers or clippers if there are any.

Tips For Your Chatterbait

Tips For Your Chatterbait

The chatter bait has a lot of vibration and movement. A plastic trailer attached to the bladed jig, on the other hand, will add more buoyancy, bulk, and action to attract bass. Furthermore, you can add more color to your plastic trailer by selecting a contrasting hue. 

The blade colors you choose are very crucial while defining your chatter bait success. Anglers who have fished in polluted water consider using chrome in clear and sunny conditions, green or black for imitating crawfish, and gold in clear and sunny conditions.

What To Avoid When Using Chatterbait

Your hookup ratio will suffer if you use a rod that is too stiff. Using a softer rod will aid the fish in catching the bait.

The depth to which your lure swims in the water is determined by the trailers. You want to hold the bait elevated in the water column while fishing near submerged grass or docks. To hold it high up, use a bulkier or boot-tail plastic. You may also go for a thinner plastic that is less resistant.

Faster reeling does not help when it comes to using chatter baits. It is because it will cause the lure’s action to mess up. The chatter bait takes care of everything and moves in an unpredictable manner. You don’t have to reel the bait in quickly to get it to work. A slow reeler is supposed to catch more fish.

How To Fish A Chatterbait

Slow Roll 

Slow rolling holds your bait close to the surface, where it can be seen by the fish. While still hearing the blade thump, slowly turn the reel handles. If the jig is running to the top, either slow down even further or move to a heavier jig.


Reel in the chatter bait as quickly as possible until the blade is just below the surface. The wake resembles a fleeing baitfish and can result in some very violent attacks.


Bass can be indifferent at times and is going to watch the bait swim by. The fish will respond to sudden movements if you rip the bait. Reel the chatter bait in slowly enough to reach the tops of the grass, then rip the bait free with a fast snap of the wrist. Lipless crankbaits work similarly to get fish to bite.


On the retrieve, shake the chatter bait by moving the rod tip up and down. The skirt will pulse and flare as the bait jumps and darts about erratically. Shake a chatter bait through submerged or tall grass with straight lanes.

When To Use A Chatter Bait

People use chatter baits for a variety of reasons, one of which is that they can go where spinnerbaits can’t. Thick weeds and grass, for example, are no match for chatter bait.

With an uncovered hook, it can float right over the top and continue to wiggle. This can result in explosive hits that might or may not penetrate the water’s surface.

When fishing with chatter bait, another thing to remember is the sort of cover you’re fishing in. Chatterbaits thrive in the grass. When opposed to other baits, such as crankbait, they fish through the grass very cleanly.

Finally, depth influences whether or not a chatter bait can perform. The blades on chatter baits must be retrieved at a certain speed or they will not operate.

Because of their massive wobbling action and weedless nature, chatter baits are extremely effective. It produces a physical vibration in the water, which triggers a bass’s predatory lateral line instincts, allowing them to bite. The blade at the front of the chatter bait helps slice through grass and cover, so you don’t get too much gunk up. 

A bass may avoid a lure that is covered in grass or other litter, so keeping your bait clean is critical if you want to get bites. All year long, bass will eat chatter bait. It can capture both small and large bass. It’s a simple and enjoyable technique. Just chuck it, wind it up, and keep on tight!


A Chatterbait will outperform a lot of other baits in your tackle box at times. Early spring and late fall appear to be the best times to use chatter baits. The chatter bait, with its rapid shaking, gets some reaction strikes even in colder water temperatures. 

Bass sometimes wants a little more movement, which you can get from the skirt shifting in the water or vibration from the blade. A little bit extra is all it takes to transform a poor fishing day into a good one.